Changzhou Jianlian ReinforcingBartec standard Construction Epoxy Steel Rebar Couplers 1.Advantages of epoxy coating rebar couplers:(1)We have reducing couplers of upset forging parallel thread connection system and rib peeling roll stamping connection system, they can be used for the connection of rebars with different diameter(from 12mm to 40mm).
Bar Conjunction Co.,Ltd
(2)It can meet the requirement of two rebar with different diameter.
(3)Handy operation and quick link.
(6)Environmental protection.2.The parameter of rebar couplers/joints/sleeve/splicing:
TEST: 100% BAR BREAK;3.Product DescriptionUpset forging parallel thread steel bar coupler can make sure 100% Bar Break Performance, it can connect steel bar diameter from 12mm to 40mm. It can connect the deformed bars of FE500, FE550, FE600, ASTMA615 or other similar ones in the diameter range of 12~50mm.
|Parameters of standard couplers:|
|Diameter of steel bar(mm)||Outer Diameter of coupler(mm)||Length of coupler|
|Dimension of thread(mm)|
1. The connection has the high tensile strength. The tensile strength of connector should equal to or not less than 1.1 times of steel bar itself. And the strength reach Grade I (reach 1.1 times of material's) and 100% exerted Grade II
2. There are many types of couplers, are suitable to used in reinforcing steel bar cage, bend reinforcing steel bar
3. High efficiency, easy operation and high speed connection, the processing of the reinforcing bar end is factory operation, it wont occupy the time of construction, the local connection can save a lot of time. Upset forging and threading one coupler only needs no more than one minute
4. Environmental protection, the processing of the reinforcing bar and the site operation is safe and reliable without noise, open flame and soot. Economize energy source and material, economy profit
Customer's special demand is available. For example, 38MM, 50MM
Introduction:1, The bar splice can be used to link rebar whose diameter is between 12mm and 50mm;
2, The tensile strength of the bar splice can be 1.1 times of the steel bars;
3, Especially, the exceed strength(special material) coupler's tensile strength is more than 800Mpa
What makes us successful A. Shorten your engineering period -- the two rebars can be connected within 35 seconds; B. Catch the highest quality -- 100% broken rebars, no safty worrying, can past any safty quality test; C. Save rebars -- give up weld and colligation rather than our connecting methods,
can save many rebars materials.
Application in Construction Project
5.Why choose JBCZ 1, High strength: the strength reach Grade I , stronger than the
|Bridge Project||Hangzhou Bay Crossing Sea Bridge, |
Jiangyin Yangzi River Bridge, Jiangsu Runyang Bridge
|Commercial Building |
|Burj Khalifa Tower, Oriental Pearl tower, |
Saraya Tower, Jinmao Tower
|Public Project||Beijing Capital Airport, Qinshan Nuclear Power Plant, |
Gazi-Barotha Hydropower Station In Pakistan,
North Jeddah Water Pump Station,
Dubai Metro, Suzhou Gymnasium
reinforcement bar and guarantees bar break under tensile stress
(tensile strength of connection point =1.1 times of connected bar).It can satisfy the requirements stipulated in the Chinese standard
JGJ107-2003,JG171-2005.2 ,Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter, bending, new and old,advance covered up rebar of GB 1499 , BS 4449 , ASTM A615 or
ASTM A706 standard.3,High efficiency: upset forging and threading one joint only needs
no more than one minute, and handy operationand quick link.4,Environmental protection and economy profit: noenvironment pollution, can work all day, not affected byweather, economize energy source and bar material.
6. One of JBCZ Clients
Rebar Coupler Clients
If you have another question, pls feel free to contact us as below:
JBCZ products have been to 30 countries over the world :
Saudi Arabia, Mexico, Poland,Colombia, Pakistan, Qatar, UAE , Japan ,France ,New Zealand ,India , Ukraine, Sudan, Brazl, Lebanon ,South Korea, Iran, Thailand , Argentina, Kuwait,Taiwan,Russia, Dominica , Turkey, Malaysia ,Jamaica,Ethiopia ,Zambia,Philippines, China
Q: Are you trading company or manufacturer ?
A: We are factory. We are the FIRST manufacturer of rebar coupler since 1987.
Q: How long is your delivery time?
A: Generally it is within 5-10 days if the goods are in stock. or it is within 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? Is it free or extra ?
A: Yes, we could offer the sample for free charge , but clients do not need to pay the cost of freight.
Q: What is your terms of payment ?
A: Payment 100% in advance. Can communicate.
B:All the payment go through Aliababa Onetouch or Alibaba assurance payment